Solar Panels / Solar Modules
Our modules are made using the highest quality of solar cells which are sourced from renowned & best suppliers in the world.
- Superior reliability with IP65 protection in all junction boxes with Bypass Diodes as per EN 50548:2011+A1 standard for 335W and above, modules with a system voltage of 1000V
- Cells Protected by high transmittance, low-Iron Fully tempered glass with anti-reflective coating to improve light transmission and a layer of PV Back-sheet and EVA to laminate (protects from environmental damage).
- Anodized Aluminum frame with screw less frame for high mechanical strength to protect the laminate and provide base for mounting structure.
- IP67 rated MC4 Compatible prewired connectors.
These modules are made from high quality materials. The tests we conduct on the raw materials, which include Mono or Poly Crystalline Cells, Toughened glass, Anodized Aluminum, Encapsulant, TPT back sheet, Copper ribbons, Junction boxes, Cables, RTV, Ingress barrier tape are above the TUV and IEC standards to ensure that we deliver world class products. Once you install them then there is no scope for worry.
STANDARD SOLAR PV MODULE – 5Wp – 160Wp
ELECTRICAL SPECIFICATIONS | 06V05 | 12V05 | 12V10 | 12V20 | 12V30 | 12V40 | 12V50 | 12V100 | 12V150 | 12V160 |
MAX. POWER -Pmax- WATTS | 5 | 5 | 10 | 20 | 30 | 40 | 50 | 100 | 150 | 160 |
OPEN CIRCUIT VOLTAGE-Voc, VOLTS | 10.5 | 21 | 21 | 21 | 21 | 21 | 21 | 21 | 22.32 | 22.32 |
SHORT CIRCUIT CURRENT-Isc, AMPS | 0.72 | 0.36 | 0.7 | 1.8 | 2.45 | 3.0 | 4.1 | 7.6 | 8.47 | 8.76 |
VOLTAGE AT MAX.POWER POINT-Vmpp,VOLTS | 8.2 | 16.4 | 16.4 | 16.4 | 16.4 | 16.4 | 16.4 | 16.4 | 18.64 | 19.23 |
CURRENT AT MAX.POWER POINT-Impp-AMPS | 0.62 | 0.31 | 0.62 | 1.25 | 1.9 | 2.4 | 3.1 | 6.1 | 8.05 | 8.33 |
NO.OF CELLS IN SERIES CONNECTED,N | 18 | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 | 36 |
NOMINAL VOLTAGE -V , VOLTS DC | 6 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 |
MECHANICAL SPECIFICATIONS | ||||||||||
MODULE SIZE- L X W X T , mm | 375X
175X 22 |
375X
175X 22 |
340X
340X 22 |
555X
340X 30 |
775X
340X 30 |
780X
355X 30 |
775X
655X 34 |
1205X
655X 34 |
1485X
665X 35 |
1485X
665X 35 |
MODULE WEIGHT(BARE)- KG | 1.2 | 1.2 | 1.6 | 3 | 4.2 | 5.5 | 6.5 | 9.5 | 11 | 11 |
MOUNTING HOLE PITCH ON LENGTH-Y mm | 200 | 200 | 200 | 300 | 450 | 450 | 450 | 642 | 800 | 800 |
MOUNTING HOLE PITCH ON WIDTH-X mm | 150 | 150 | 316 | 296 | 296 | 486 | 610 | 611 | 630 | 630 |
1. All modules are made with MONO/POLY CRYSTALLINE SOLAR CELLS | 4. Our standard modules supplied without bypass diode and can be arranged on request |
2. All measurement tolerances on electrical parameters are lies in +/- 10% | 5. All specifications are subject to change without notice. |
3. All electrical parameters specified above are measured at STC conditions | 6. All the modules having 5 years LIMITED EXTENDED WARRANTY. |
Cell temperature 25 deg.C, 1000W/ M2 Irradiance and 1.5 AM Spectrum |
MONO FACIAL SOLAR PV MODULE – 285Wp – 600Wp
ELECTRICAL SPECIFICATIONS | POLY | POLY | MONO PERC | MONO PERC | MONO PERC | TOPCON | TOPCON |
MAX. POWER -Pmax- WATTS | 285 | 335 | 450 | 545 | 555 | 580 | 600 |
OPEN CIRCUIT VOLTAGE-Voc, VOLTS | 39.51 | 46.27 | 41.85 | 49.97 | 50.00 | 53.03 | 54.00 |
SHORT CIRCUIT CURRENT-Isc, AMPS | 9.32 | 9.41 | 13.31 | 13.74 | 14.05 | 13.89 | 14.05 |
VOLTAGE AT MAX.POWER POINT-Vmpp,VOLTS | 31.16 | 37.90 | 35.64 | 41.98 | 42.05 | 43.50 | 44.37 |
CURRENT AT MAX.POWER POINT-Impp-AMPS | 9.04 | 8.85 | 12.65 | 12.99 | 13.20 | 13.34 | 13.53 |
NO.OF CELLS | 60 | 72 | 120 | 144 | 144 | 144 | 144 |
MODULE EFFICIENCY (%) | 17.13 | 16.87 | 20.68 | 20.99 | 21.39 | 22.48 | 23.26 |
MECHANICAL SPECIFICATIONS | |||||||
MODULE SIZE- L X W X T , mm | 1663X
1000X 35 |
1985X
1000X 35 |
1914X
1137X 35 |
2284X
1137X 35 |
2284X
1136X 35 |
2277X
1133X 35 |
2277X
1133X 35 |
MODULE WEIGHT(BARE)- KG | 18.2 | 21.8 | 24.0 | 28.7 | 29.5 | 28.7 | 28.7 |
MOUNTING HOLE PITCH ON LENGTH-Y mm | 863 | 1185 | 996 | 1188 | 1100 | 1188 | 1188 |
MOUNTING HOLE PITCH ON WIDTH-X mm | 955 | 955 | 1092 | 1092 | 1090 | 1092 | 1092 |
1. All modules are made with POLYCRYSTALLINE SOLAR CELLS/ MONO PERC CUT SOLAR CELLS / N TYPE TOPCON CELLS | 4. Our standard modules supplied without bypass diode and can be arranged on request |
2. All measurement tolerances on electrical parameters are lies in +/- 5% | 5. All specifications are subject to change without notice. |
3. All electrical parameters specified above are measured at STC conditions | 6. All the modules having 25 years LIMITED POWER OUTPUT WARRANTY. |
Cell temperature 25 deg.C, 1000W/ M2 Irradiance and 1.5 AM Spectrum |
BI FACIAL SOLAR PV MODULE – 545Wp – 600Wp
ELECTRICAL SPECIFICATIONS | MONO PERC | MONO PERC | MONO PERC | TOPCON | TOPCON | TOPCON |
MAX. POWER -Pmax- WATTS | 545 | 575 | 590 | 560 | 580 | 600 |
OPEN CIRCUIT VOLTAGE-Voc, VOLTS | 49.97 | 53.52 | 54.15 | 52.02 | 53.03 | 54.0 |
SHORT CIRCUIT CURRENT-Isc, AMPS | 13.74 | 13.53 | 13.73 | 13.69 | 13.89 | 14.05 |
VOLTAGE AT MAX.POWER POINT-Vmpp,VOLTS | 41.98 | 44.98 | 45.48 | 42.65 | 43.50 | 44.37 |
CURRENT AT MAX.POWER POINT-Impp-AMPS | 12.99 | 12.79 | 12.98 | 13.14 | 13.34 | 13.53 |
NO.OF CELLS | 144 | 156 | 156 | 144 | 144 | 144 |
MODULE EFFICIENCY (%) | 20.99 @ STC 25.18 @ 20% | 20.48 @ STC
26.57 @ 20% |
21.02 @ STC
27.26 @ 20% |
21.71 @ STC
26.05 @ 20% |
22.48 @ STC
26.98 @ 20% |
23.26 @ STC
27.91 @ 20% |
MECHANICAL SPECIFICATIONS | ||||||
MODULE SIZE- L X W X T , mm | 2284X
1137X 35 |
2469X
1137X 35 |
2469X
1137X 35 |
2277X
1133X 35 |
2277X
1133X 35 |
2277X
1133X 35 |
MODULE WEIGHT(BARE)- KG | 28.7 | 31.7 | 31.7 | 28.7 | 28.7 | 28.7 |
MOUNTING HOLE PITCH ON LENGTH-Y mm | 1188 | 1285 | 1285 | 1188 | 1188 | 1188 |
MOUNTING HOLE PITCH ON WIDTH-X mm | 1092 | 1092 | 1092 | 1092 | 1092 | 1092 |
1. All modules are made with BIFACIAL MONO PERC CUT SOLAR CELLS / BIFACIAL N TYPE TOPCON CELLS | 4. Our standard modules supplied without bypass diode and can be arranged on request |
2. All measurement tolerances on electrical parameters are lies in +/- 5% | 5. All specifications are subject to change without notice. |
3. All electrical parameters specified above are measured at STC conditions | 6. All the modules having 25 years LIMITED POWER OUTPUT WARRANTY. |
Cell temperature 25 deg.C, 1000W/ M2 Irradiance and 1.5 AM Spectrum |
Reliability
Reliability
We provide accurate, reliable and ethical services with our expert staff. We apply the fastest and most reliable methods for your brand.
Loyalty
Loyalty
Our long-term work continues until the job is finished. We establish solid and long-term relationships with all the companies we work with.